Fog Kit Mist System Misting Cooling Propagation Humidity Greenhouse Patio Equine

Description

Complete Modular Misting/Fogging/Cooling/Propagation/Humidification System
Kit Includes:
100 feet poly hose 5/8"
Filter
Hose connection (hooks to standard garden hose)
16 Fogger nozzles with Leak Prevention Device (LPD)
Hole Punch
1 Coupler
2 Elbows
2 End closures
1 Tee
This Kit includes everything for a complete misting/fogging/cooling system. They come ready to plumb into a garden hose or
faucet
. Great for the patio, outdoor events, pool areas, under umbrellas, around kids playground equipment, water features, animal
kennels
, or anywhere that needs to be cooled down misted or even greenhouses for propagation and humidification. System is designed to operate at standard pressure 30 to 60 psi
NO BOOSTER PUMP NEEDED!
Misters should be hung 2 to 6 feet apart or above the targeted area or based upon the desired effect (modular system allows precise placement of the nozzle). Other items can be added to complement the system such as more nozzles, timers, cable ties (to secure the hose) and more. This is the same material used by many commercial companies to help cool, humidify, and even propagate. This system can be expanded for future growth, and the sprinklers are modular to allow for change if the application requires it. The picture show an installation on a fence at 6 foot spacing as well on the ground at 2 foot spacing to show pattern and mist off standard water pressure as well as under an umbrella for just a few of the possible uses. The possibilities are endless with these kits. We even have some where they are used to keep certain equipment run cooler and more
efficient
.
A Controller can be added to help automate based on your requirements.
Let us Know what you would like to see in our store. Contact us if there are any questions or if you need assistance in system design and/or layout. Thanks For visiting our Irrigation-Mart E-store.
SAY-RAIN
COOLING
One calorie is the amount of heat necessary to raise the temperature of 1 cm sq of water by 1 degree C.
The conversion of water from liquid to vapor absorbs heat from the surrounding air at a rate of 590 calories per 1 gram of evaporated water. This process lowers the air temperature.
Efficient
installation and operation can reduce the temperature in a greenhouse between 6 to 9 degrees F, depending on two environmental factors: external temperature and humidity.
Efficient cooling with foggers requires an effective ventilation system that continually introduces external air into the greenhouse to replace the humid air.
A precipitation rate of .118 inches per hour (3mm/hour) is suitable for cooling.
The duration of the fogging depends upon the air velocity created by the ventilation system.
For an outdoor setting this may be accomplished by using wind or fans to move the air.
Controllers can be added to the system for intermittent misting.