4Spray Eductor Glass-Reinforced Polypropylene Tank Mixing Agitation Nozzle

Description

4Spray Eductor Glass-Reinforced Polypropylene Tank Mixing Agitation Nozzle
4Spray’s Eductor Tank Mixing Agitation Nozzles
are designed to convert high input fluid velocity into low pressure recirculation for effective mixing and agitation. The amount of fluid that exits the nozzle is three to five times the amount of fluid pumped. Our nozzles require minimal maintenance and are inherently clog-resistant for immediate and continuous mixing at temperatures up to 95° C
What Do Eductor Tank Mixing Agitation Nozzles Do?
Tank mixing is necessary to keep contents and solutions thoroughly mixed, proper chemical/biological reactions, homogenization of products, sediment build-up prevention, proper draining/pumping, thermal stratification prevention and bacterial growth avoidance.
4Spray tank mixing nozzles greatly reduce the complexity, capital cost, and maintenance requirements of any system by utilizing a pump and submerged spray nozzles, in place of conventional mechanical components, to mix immiscible liquids or solids that need to be kept suspended.
?? EFFECTIVE MIXING AND AGITATION – 4Spray tank mixing agitation nozzles are designed to convert high fluid input velocity into a low pressure zone that induces surrounding liquid in the tank to enter into the nozzle and recirculate, thus effectively mixing the tank contents.
?? ECONOMICAL TO OPERATE – The amount of fluid that exits the nozzle is three to five times the amount of fluid that is pumped. This multiplier effect allows greater mixing efficiency while using smaller pumping capacity in open or closed tanks.
?? MINIMAL MAINTENANCE & CLOG RESISTANT – 4Spray tank mixing agitation nozzles require minimal maintenance with proven results. With no moving parts, our eductors are inherently clog resistant for reducing required maintenance and maximizing flow.
?? IMMEDIATE AND CONTINUOUS MIXING – Our eductor design allows the fresh feed to be supplied to the nozzle inlet rather than recycling it from the tank. This allows immediate mixing of the fresh feed with the contents of the tank, and then continuous mixing as the exit jet propagates downstream.
?? TOLERATES TEMPERATURES UP TO 95° C – 4Spray’s glass reinforced polypropylene plastic tank mixing nozzles are a value-based product that allows you to mix fluids with temperatures up to 95° C without thermal breakdown.
Common Applications for Tank Mixing Nozzles
Waste water treatment plants
Oil and gas storage tanks
Drinking water holding tanks and reservoirs
Aerobic & anaerobic digesters
Homogenize tank contents when pumping/draining
Sweep sludge & sediment from tank bottoms
Blending ethanol and bio-diesel
Particulate/solid suspension
Transport tankers
Chemical injection/mixing
Acid/chemical storage tanks
Slurry mixing/holding tanks
Lake/river water inlets
Steam/air injection
Aquarium and Aquatic use
Plating tanks, Cleaning tanks
Phosphating tanks
E-coat tanks
Fertilizer tanks
Pulp tanks
Sludge tanks
Paint booths
Anodizing tanks
Cooling towers and decorative fountains
4Spray PPL tank mixing nozzles are available in sizes from 1/4 inch to 1.5 inch.