0.5W - LED Upgrade E10 Bulb for (1 to 2) Cell Flashlight or 222 Penlight 1-3V

Description

0.5W - LED Upgrade E10 Bulb for (1 to 2) Cell Flashlight
or Penlight
0.27A 1-3V
Long Run Time, Constant
Brightness
,
0.5W - LED Upgrade Bulb for *** 1 to 2 *** Cell Flashlights
0.27A 1-3Volts
LED Flashlight Lamp E10 Scew Bulbs Also for Standard 1 or 2-Cell,  Flashlights
for
1 to 2-Cells
Note: This constant current driver is the best being able to operate from ½ the rated voltage and still having
constant brightness to get the most out of the batteries.
1.2V       14 Lumens
1.5V       22L
2.5V       52L
3.0V       61L
STOP:
Please consider these brigter LEDs for your application:
Similar 55 Lumen Rated (52 Lumen at 3 Volts)
0.5W - LED Upgrade E10 Bulb for (1 to 6) Cell Flashlight 0.15A,1 - 9V
https://www.ebay.com/itm/332227262802
Brighter 198 Lumen (151 Lumen at 3 Volts)
1.0W - LED Upgrade E10 Bulb NEW for (1 to 6) Cell Flashlight 0.31A 1 - 9V
https://www.ebay.com/itm/232341400730
Brighter 323 Lumen (212 Lumen at 3 Volts)
5.0W CREE - LED Upgrade MES E10 Bulb for (1 to 6) Cell Flashlights 0.4A 1.2 - 9V
https://www.ebay.com/itm/332972993942
Use these LED to upgrade standard flashlights to superior brightness, efficiency, and longevity.
This 0.5W, 1W, or 5W LEDs are a GREAT Upgrade bulb made for the 2.4V NiCad, NiMh, 2-Cell Lithium or 2-cell
(ALSO Headlights
)
Direct Replacement for: 2 C/D Cell E10 Screw BULBS
--- Super Bright Led's for Less ---
Simply replace your existing bulb with this LED – no modifications necessary!
Works with standard 1-Cell, to 2-Cell, flashlights with Screw bulb
Minimizes battery and bulb replacement waste
LED Bulb is Standard Polarity with bottom contact (+) Flange (-)
This LED is not damaged by reverse polarity if
batteries
are reversed
Focusability of flashlight is preserved with these point source LEDs
Brighter Light for improved vision for
enhanced visibility of fine detail
Longer battery life from high efficiency LED
Long lamp life 50,000 hours of continuous use
Dependable and shock resistant
Easy To Install
Features:
INTENSE BRIGHT LIGHT
output comes from the ultra-efficient LED. The LED does not fade when it gets hot, so its light output is stable even after extended run times.
FOCUSABILITY
These LED Point source lights preserve one of the most outstanding features of many flashlights, the ability to focus. A focused beam that throws a bright beam a very long distance.
LONGER BATTERY LIFE
results from the higher efficiency of the LED compared to the standard incandescent bulb 10 Lumens / watt. These LED maintain a brighter white light output as the batteries discharge than incandescent bulbs which turn to an amber light.
INDESTRUCTIBLE LED
performance and lifetime operation. Unlike incandescent bulbs with a thin fragile filament that breaks, LEDs wear out very slowly. This is likely to be the last bulb you will ever need to buy. The rated lifetime is 50,000 hours.
EASY TO INSTALL
as if just replaces your existing bulbs - no modifications necessary!
See the difference!
* Increased Brightness and Longer Battery life run time.
Standard PR LED vs. Incandescent
1) Warning! - Do not look directly into lit lamps at a close distance or shine into eyes, as they are extremely bright and could cause eye damage.
2) Warning! – Protect hands and eyes as glass bulbs may break or shatter.
3) Warning! - For safety always follow manufactures safety and operational instructions.
4) Warning! - Remove batteries, turn-off or disconnect power before changing bulb.
5) Warning! -  Small Parts
-
Not for children under 3 yrs
★
Please return a positive review for good service
Description:
Upgrade / Replacement for standard flashlight Lamp used in many applications that take a screw base light bulb
1 to 2-cell battery operated products (Energizer Zink, Energizer Alkaline,  PowerGenix NiZi, Energizer AA lithium, NiCad, NiMH, batteries.
☛
·
Buy two now and Save with discounted shipping,
the right bulb is hard to find, why not get two
******* This listing is for  0.5 Watt 50 Lumen LED E10 Lamp ******************
(Flashlight, battery, or dime not included)
Also you maybe interested in:
* Other LED Sizes for longer run time or higher brightness Higher Power LEDs please see our other listings.
https://stores.ebay.com/Draco-Products
* AA Battery D CELL Adapter Holder 1.5V Cell Converts 1, 2, 3 AA to 1 D Size
https://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=331078037178&ssPageName=STRK:MESE:IT#ht_685wt_1124
This is a very popular style (Screw base) bulb for Many Viewers, flash lights, and devices that run on TWO batteries.
Specification for LED Bulbs vs. Standard PR-2
Lamp Part Number
E10-0.5W-1-3VDC
Incandescent PR-2 Reference Only
Brightness
Bright White
White to Amber
Lamp Battery Run Time vs. PR2
Extended*
(4X)
Short
(1X)
Base Type
P13.5S
P13.5S
Voltage
3.0V
2.4V
Voltage Range
1.2V-3.0V
2.5-3V
Current (TYP 3.0V)
270mA
500mA
Luminous Flux
50 L
10 L
Max Watts
0.5
1.3
Light Color
White
White
Lamp Life Hours
50,000
15
Max. Overall Length
0.97"
1.20"
Max. Lamp Dia.
0.53"
0.53"
Primary Application
Flashlight, Lamp,
lantern
Flashlight, Lamp, lantern
* LED bulb Increased Brightness and Longer Battery life
LED Bulb is Standard Polarity with bottom contact (+) Flange (-)
*Specifications are accurate for this Miniature LED Bulb.
Applications for this standard Screw type bulb are too numerous to list so purchaser is responsible for compatibility with their actual product.
Thank You.
1 LED Flashlight Lamp, For 1 or 2  "AAA" Or "AA" Or "C" Or "D" Size Batteries
The Lamp has a STANDARD 'E10' Base - is International standard Screw base
, 9.2mm Diameter
★
FEEDBACK:
Please return a positive review for good service,
We automatically leave positive feedback for all customers.
Thank You.
We are very accommodating and will be more than happy to fix any problem. We want your repeat business!
© 2019-2022 Draco Products. All Rights Reserved